electrical

  1. Son_Of_Dog

    Electrical Gremlins Part 5: The Reckoning?

    Here's the links to the previous threads relevant to this journey: Blank Display, No Status Lights, And Other Issues Electrical Gremlin Strikes Again Indicators Not Functioning Electrical Gremlins Part 4 There's a lot of dumb **** to take in here, so to summarize... Blank display thread is...
  2. smokit2

    Imagine an electrical issue... '12 R3T

    While hunting the cause of sporadic safety start clicks, stuck a tester somewhere it didn't like. The bike is dead. The headlight is not coming on but ll the gauges are working. Fuses are all good. How can I trace down the headlight power?
  3. Rocketeer4life

    Electrical gurus and Rocket masters help greatly needed/appreciated

    So attempting another post on this, with better thought out detail. My 05 standard finally was fixed to perfect, and i thought it 2 be no biggy to open up the MPH speedo to tighten up, as it was loose. DID disconnect battery+ before tinkering. did spray light amount of simple green to clean out...
  4. Frans

    Horn/brake light/turn indicators not working all the time

    No problems with the brake/horn/indicators before starting, it starts without any problems, at 2000rpm the voltage is 14.5v (neutral) but when riding the horn does not work. The brake light and the turn indicators might or might not work while riding. Hard to pinpoint a condition that will...
  5. Electrical problem TFC rocket

    went to get my bike out pressed key fob it went to green, pressed red start switch up then down but all that happened was nothing showing on display clock but all warning lights and head lights just keep flashing on and off, it had some very small words on the left side off clock flashing on/off...
  6. Pauls999

    What type of electrical connectors are used on the Rocket 3r

    I'm just putting on a tail tidy to my Rocket 3r but I have a little issue. The existing wiring loom for the stock tail lights and indicators is too long for the new position for the indicators under the seat and then too short to reach the number plate on the rear hub. So the easiest and tidiest...
  7. azmerlin

    Electrical ports ???

    Hi, Just had my 2016 delivered yesterday and don't even have insurance yet, but I wanted to start playing with it so my questions for now are; 1. If I got a genuine Triumph alarm, where does it plug in? 2. I don't currently have heated grips, I want to add some, first, any recommendation, re...
  8. Son_Of_Dog

    Electrical Gremlins Part 4

    I have a new issue that I'm trying to get solved before the big RAA West trip. I think I've seen this happen with @nolton 's bike, and maybe someone will remember what the fix was. What's happening is when I have the ignition on and the killswitch off, (bike ready to start) the bike just makes...
  9. tribal

    Need Info on Fuel Pump Electrical Connector + question on discoloration

    Q. Does anyone know what an aftermarket connector would be for the fuel pump plug on the wiring harness side??? I disassembled the tank/throttle bodies to put new O-rings in the Oil tank and one of the wires broke right at the connector. I have soldered it and got the bike running (well, aside...
  10. CCjon

    Electrical Gremins

    Need some advice from someone with more Rocket electrical knowledge than I. This is a 2011 Roadster, running an auto battery and sidecar. Installed the group buy heavy duty battery cables and Power Commander V, turned on the ignition, no sweep, nothing on the gauges. Headlights high and low...
  11. Jeremy

    More electrical questions

    i hope you all are not tired of me yet. I have more issues and questions. 1. Got my new headlight. Parking light has never worked. New light has white and amber halo. I thought i would wire the white halo with low beam and amber with parking light. I played with the parking light bulb with the...
  12. heil_7134

    electrical problem

    so i was working with my bike, 06 classic few days ago and suddenly tune ecu wont detect the ecm, i tried turning the key off and on and kill switch to run and theres the usual gauge sweep but i noticed the fuel pump didnt prime, the stepper motor and secondary didnt move, when i pressed starter...
  13. Son_Of_Dog

    Electrical Gremlin Strikes Again

    Well, I've been staying up late working on the bike for two days trying to chase out this electrical gremlin. The OLED screen on the cluster is blank, but backlit, the gauges don't sweep or anything, the killswitch does nothing. Headlights come on, battery is charged, fuses are good. Bike will...
  14. Son_Of_Dog

    Blank display, No status lights, and other issues

    Well gents, it's been a trying night. Been cold or rainy or both for the last several weeks here in OK, so the bike has been living up to its name making smells in my garage every week or so. This evening, when I went to try to start it up, the display came on and showed blank. The ignition...
  15. Paul Schwalm

    R3 electrical

    I just got a 2007 rocket three a couple of weeks ago. It is now showing erratic behavior in that the speedo and tach don’t always cycle when starting. At the moment it is the speedometer only which is not working and the trip meter resets after each use. Looking for common problems in the...
  16. Massimo 69

    Major Electrical issue please help

    Hello everybody, my name is Max from italy I bought a used R3 classic 2009 with 10.000 miles in May, I used since last week only riding 1000 miles in total, no problem at all, till last week, after a stop of 15 minutes I was unable to restart the bike I pushed starter button 2 rev of the...
  17. Norman Mueller

    Electrical Blackout pushing start button???

    Hi all, became a 2005 r3 owner by accident, Neighbor sold it to me be cause his wife was up in arms about that "monster" The bike ran like a charm for the past 2000 miles - its only got 17k miles on it. Its rattles and the cam chain and valves are being done next week - if I can get it to...
  18. HIM57

    Burnt electrical connector

    Think I found why the connector wiggle is required to get ignition to come on -
  19. Brent Baer

    Location of cooling fan electrical connection

    I took my radiator and fan assembly out, and for the life of me I can’t figure out where the connector on the bike os to plug it back in. Can anyone please help.
  20. Cold start issue... Please help 05R3

    Hi all, I have posted about this issue before with no resolve. Hoping someone can help me out. Unless the outside temp is at least 80 degrees or more it will not start also has a very slow and sluggish turn over. I figured out that if the temp is less than 80 degrees I can take a space heater...
Top